Using a BETU floor scrubber machine involves several steps to ensure effective cleaning and proper maintenance. Here’s a general guide on how to use a floor scrubber machine:

1. Preparation

– Read the Manual: Before starting, read the manufacturer’s manual for specific instructions and safety guidelines.
– Inspect the Machine: Check the machine for any visible damage or wear. Ensure all parts are functioning correctly.
– Fill Water and Cleaning Solution: If using a ride-on or walk-behind scrubber, fill the clean water tank with water and add the appropriate floor cleaning solution according to the manufacturer’s instructions. Ensure the solution is compatible with your floor type.

2. Setting Up

– Adjust Settings: Set the appropriate cleaning solution concentration and scrub brush or pad type based on the floor type and level of dirt.
–Check Batteries/Fuel: If using a battery-operated machine, ensure the batteries are fully charged. For fuel-powered models, check the fuel levels.

3. Operation

– Turn On the Machine: Power up the floor scrubber according to the instructions in the manual.
– Move to Cleaning Area: Position the scrubber at the edge of the area you plan to clean.
– Engage Brushes/Pads: Lower the scrub brushes or pads to the floor. Ensure they are properly engaged and aligned.
– Start Scrubbing: Begin moving the machine in a consistent, overlapping pattern to cover the entire area. For larger areas, work in sections to ensure thorough cleaning.

4. During Cleaning

– Monitor Water Levels: Keep an eye on the clean water and dirty water tanks. Refill or empty them as needed.
– Adjust Speed: Adjust the machine’s speed based on the level of dirt and floor type. Slower speeds may be needed for heavily soiled areas.

5. Post-Cleaning

– Turn Off the Machine: Once cleaning is complete, turn off the machine and remove the key or power source.
– Empty Tanks: Empty the dirty water tank and clean it thoroughly. Dispose of the wastewater according to local regulations.
– Clean Brushes/Pads: Remove and rinse the scrub brushes or pads. Allow them to dry completely before storing them.
– Refill Tanks: Refill the clean water tank if you plan to use the machine again soon, or clean and store it properly.

6. Maintenance

– Inspect Regularly: Regularly check and maintain the machine, including brushes, pads, and filters. Replace any worn or damaged parts.
– Store Properly: Store the machine in a clean, dry place to prevent damage and extend its lifespan.

7. Safety Precautions

– Wear Protective Gear: Use appropriate personal protective equipment, such as gloves and safety goggles.
– Avoid Overloading: Don’t overload the machine with excessive cleaning solution or dirty water.
– Follow Manufacturer’s Instructions: Always adhere to the manufacturer’s safety and operation guidelines.

By following these steps, you can ensure effective cleaning and proper maintenance of your BETU floor scrubber machine.

For more information ,please contact us!